Mitsubishi Electric Trane NTXUKS09A112A Serie Notice D'utilisation page 11

C
LEANING
Intake grille
1. Slide the shafts and unhook the safety strings to remove.
• Wipe with a soft dry cloth, or wash it with water using soft cloth, sponge, etc.
• Do not soak it in water for more than two hours.
• Dry it well in shade before installing it.
Hook
Safety strings
2. Install the intake grille by following the removal procedure in reverse.
WARNING
Make sure to hook the safety string of the intake grille.
Not doing so may cause injury due to the intake grille falling.
Air fi lter (Air purifying fi lter)
• Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• Dry it well in shade before installing it.
Install the tabs into the intake grille hole.
Air cleaning fi lter
(Anti-Allergy Enzyme fi lter, option)
Back side of air fi lter
Clean every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
• Soak the fi lter and its frame in lukewarm water before rinsing it.
(Diluted mild detergents can be used when dirt cannot be removed.)
• After washing, dry it well in shade.
Every year:
• Replace it with a new air cleaning fi lter for best performance.
• Parts Number MAC-408FT-E
Important
• Clean the fi lters regularly for best performance and to
reduce power consumption.
• Dirty fi lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air fi lters
every 2 weeks.
En-10