Fantech 1787269 Guide Rapide

V e n t i l a t i o n C o n t r o l S y s t e m
I n t r o d u c t i o n
The different wall controls offered by Fantech are designed to meet your needs while being visually appealing. They will enable you to maximize
the use and enjoyment of your ventilation system.
2 0 M I N U T E T I M E R
The Fantech 20 minute timer is
compatible with Fantech SHR, VHR
and SER series models. This button
activates the system on continuous
mode for 20 minutes, it then returns
to the predetermined setting.
To cancel this operation, simply
press the button a second time.
2 wire (Uni-Ctrl)
Insert the stripped end of the wire into the terminal connection on the HRV or ERV near the power cord marked TIMER + and TIMER -.
Using a pen-type screwdriver, tighten the screws.
Run the wires to a push button touch switch. With the polarity respected, insert the stripped end of the wires into the electrical connection marked " + "
and " - " . Using a pen-type screwdriver, tighten the screws.
SCREW THE CONTROL MOUNTING PLATE TO THE BOX THEN SCREW THE COVER OVER THE MOUNTING PLATE
VISSER LA PLAQUE DE MONTAGE A LA BOITE ELECRTRIQUE PUIS VISSER LE COUVERT A LA PLAQUE DE MONTAGE
ELECTRICAL BOX / BOITE ELECTRIQUE
MOUNTING PLATE / PLAQUE DE MONTAGE
Not Included.
MACHINE SCREW
VIS MECANIQUE
Item# 401285: RTS2
Rev Date: 20060711