USE AND MAINTENANCE
It is recommended to operate the appliance prior to cooking.
It is recommended to leave the appliance in operation for 15 minutes
after cooking is terminated in order to completely eliminate cooking
vapors and odours.
The proper function of the cooker hood is conditioned by the
regularity of the maintenance operations, in particular, the active
carbon filter.
The anti-grease filters capture the grease particles suspended in the
air, and are therefore subject to clogging according to the frequency
of the use of the appliance.
In order to prevent fire hazard, it is recommendable to clean the
filter at a maximum of 2 months by carrying out the following
instructions:
- Remove the filters from the cooker hood and wash them in a
solution of water and neutral liquid detergent, leaving to soak.
- Rinse thoroughly with warm water and leave to dry.
- The filters may also be washed in the dishwasher.
Please take note that the aluminum panels may alter in color after
several washes.
Clean the fan and other surfaces of the cooker hood regularly using
a clot moistened with denatured alcohol or non abrasive liquid
detergent.
The illumination installation is designed for use during cooking and
not fo prolonged general illumination of the environment. Prolonged
use of the illumination installation notably reduces the duration of
the bulb.
Use a one-edged screwdriver or any other appropriate tool to lift and
remove the overhead light fixture. Replace the damaged lamp. Use
only halogen lamps as the original specification, avoiding contact
with hands. Return the light fixture to its position (snap fastening).
(Fig. 7)
V.2
8