Connecting Devices; Power Save Function - Korg PANDORA stomp Manuel D'utilisation

Connecting devices

When connecting an external device (ie‐guitar amp, bass amp, CD player, etc.) be
sure to turn the unit off.
● If an audio player is connected to the AUX jack, you can play along with your
guitar or bass. However the volume must be adjusted from the connected device.
● Use a standard monaural cable to connect the PANDORA stomp's OUTPUT jack
to a guitar or bass amp. Only the L (Left) channel output will be heard. When an
amp is connected, it is better for the sound if the Cabinet Effect Through function
is turned on (see p.25).
● PANDORA stomp's output level and sound quality will vary depending on which
headphones are used. We recommend using good quality low impedance head‐
phones, 32 Ohms or less with a sensitivity rating near 100dB/mW or above. Many
headphones sold for use with portable CD or Mp3 players will work just fine.
● Use the USB cable if you want to connect the PANDORA stomp to your computer.
Power Save function (only when using the AC adapter)
If there has been no user input or other operation of the PANDORA stomp for at
least four hours, the Power Save will be is activated to automatically reduce power
consumption. This function can be disabled (see p.26). When the Power Save func‐
tion is activated, "POWER SAVE" will appear on the LCD. To recover, press any but‐
ton or use the foot switch.
12