Publicité
Les langues disponibles
Les langues disponibles
Initial setup
1
Connect the included USB cable to charge the headset.
When charging while the headset is not connected to the wireless adaptor, the
ˎ
status indicator on the headset pulses orange. When fully charged, the status
indicator turns off.
When charging while the headset is connected to the wireless adaptor, the status
ˎ
indicator on the headset is white. When fully charged, the status indicator blinks
orange once and then turns solid white to show it's still connected.
2
Connect the wireless adaptor to a USB port on your PS5
PS4
console.
™
The status indicator on the adaptor blinks white while searching for the headset.
3
Slide the
wireless adaptor. The headset status indicator blinks blue while searching and turns solid
white when the connection is complete.
You can also check by sound. When your headset powers on, it will beep and search for
the adaptor. When the connection is complete, another beep sounds.
If a connection can't be made, the headset turns off. Slide the
and then on. If a connection still can't be made, try resetting the headset
(see "Resetting the headset").
Using your headset wirelessly with a PS5
PS4
console
™
Be sure to always update your system software to the latest version.
ˎ
You can use up to 2 wireless headsets at the same time on your PS5
ˎ
or PS4
console.
™
If you move out of range for more than 30 seconds, you'll hear a low beep to indicate the
ˎ
connection is lost. When you move back into range, you'll hear a
high beep to indicate the connection is restored.
This headset supports 3D audio on PS5
ˎ
The Headset Companion app for PlayStation
ˎ
(power) switch on.
When your headset powers on, it looks for the
consoles if the game supports 3D audio.
™
4 consoles does not support this headset.
®
console or
™
switch off,
console or
™
console
™
Publicité
