Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
840084900 Ev01 5/24/01 1:44 PM Page 8
Retractable Cord
2
Storing Your Iron
1. When finished ironing, turn the
Protective Soleplate Shield, you can
store the hot iron immediately.
2. Empty all water in iron. If the water is
8
(continued)
2. To store cord, place the iron,
Wind
soleplate down, on ironing board.
clockwise
Unlatch Retractable Cord Handle
and wind clockwise.
IMPORTANT! Do not press Cord
Release Button while winding cord.
Only wind clockwise or the cord may
jam. See illustration.
3. If cord jams while winding, push the
Cord Release Button to unwind
slightly until cord is free. Then slowly
start to wind clockwise again.
If Retractable Cord Handle comes
off, it is designed to snap back
1
into place.
1. Place pins of handle into slots
Retractable
in reel. See illustration.
Cord Handle
2. Lift handle up until it snaps in place.
This will result in steam and water
Temperature
droplets discoloring clothing.
Control Dial to
Carefully hold iron over sink with
0 (OFF) and
water tank opening aimed down.
unplug iron. Set
Let all water drain out.
iron on its heel
3. To clean the soleplate, wipe with a
and let cool.
wet cloth and dish detergent. Wipe
NOTE: If you
clean with a damp cloth. Do not use
have the
abrasive cleaners.
CAUTION: Be sure iron is cool prior
to cleaning.
4. To maintain good steam production,
not emptied, it
clean the iron periodically using the
may interact
self-clean setting described in the
with the metal
"Self-Clean System" section.
of the iron and
cause the water
to discolor.
Publicité
