Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
840084900 Ev01 5/24/01 1:44 PM Page 5
Filling the Water Tank
Temperature Dial and Fabric/Setting Chart
Setting
To Iron
0
Off/Clean
1
Acetate
2
Nylon
3
Acrylic
4
Silk, Lycra
5
Wool
6
Polyester
7
Rayon
8
Cotton
9
Linen
NOTE: To dry iron on settings 4-9, empty all water from the tank.
Ironing Tips
• Always check fabric content before
ironing. If the fabric is a blend, use
the lower temperature setting.
• If the fabric content is unknown, use
the lowest temperature setting and test
on an inside seam of the garment.
• If ironing several items, start ironing
the items which need the lowest
temperature setting first. An iron heats
up much faster than it cools down.
1. Make sure iron is unplugged.
2. Regular tap water should be used.
In areas with extremely hard water,
the use of distilled or filtered water
is highly recommended.
3. Slowly pour water into water fill
opening until water level reaches
the top of the Water Window
Water
(8 ounces). Never overfill.
Window
NOTE: Never place anything in your
iron except water. Products like liq-
uid starch will damage your iron and
clothing if placed in the water tank.
Ironing Instructions
Dry iron on the wrong side of the fabric.
Dry iron; use spray if necessary.
Dry iron; use spray if necessary.
Iron on the wrong side of the fabric.
Use a pressing cloth and steam iron.
Iron while fabric is still damp.
Iron on the wrong side of fabric.
Iron while still damp.
Iron on wrong side while fabric is still damp.
• To maintain the quality of the
soleplate, never iron over zippers,
pins, buttons, or anything metal.
• Use caution when ironing around
plastic buttons and zippers as these
may melt.
5
Publicité
