Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
1. Prior to insertion you will need to install the safety strap.
The safety strap is located inside the cap of the Echo
Remove the button fastener from the strap.
Failure to plug Echo
before inserting the trailer's 7-way connector into the Echo
result in an improper calibration and inconsistent trailer braking.
2. Slide the strap through the clasp on the Echo
3. Insert button fastener facing outwards.
CURTMFG.COM
•
NEED ASSISTANCE?
unit.
®
into the vehicles 7-way socket
®
®
.
®
•
877.287.8634
•
51180-INS-RG
4. Insert Echo
alignment notch and slot to properly orient the plug and receptacle.
could
5. Wrap the strap around the 7-way cover and pin to secure.
6. Once the strap and Echo
7-way, the LED will flash blue. The Echo
the mobile application. Proceed to 'Initial Setup for Bluetooth'.
•
PAGE 2
into the vehicle 7-way socket, using the plug's
®
installed and inserted into the vehicle's
®
®
is now ready to pair with
Publicité
