Conceptronic CKBUS Manuel D'utilisation page 6

ENGLISH
3.1 Installation
• Turn on your computer.
• Connect the USB cable of the USB keyboard to a free USB port on your
computer.
The USB keyboard will be recognized and installed automatically. No driver
installation is required.
3.2 Usage
When the USB keyboard is connected and installed, you can directly use it.
Note: If you connect the USB keyboard to a USB controller card, instead of an
onboard USB port, it is possible that you cannot configure your
computer BIOS settings with the USB keyboard. In that case, connect
the USB keyboard to an onboard USB port.
On the USB keyboard, there are 3 power management buttons to manage the
power of your computer.
Wake Up Puts the computer into Wake Up mode.
Sleep Puts the computer into Sleep mode if it supports power management
and it is enabled. You can put your computer to sleep by pressing this
button directly on your computer, protecting your data and saving
energy.
Power Puts the computer into Power-Off mode if it is turned on.
Turns on the computer if it is turned off.
(The Power-On function available depends on how the motherboard
is set up. For more information about how your computer resumes
operation, see the documentation that accompanied your computer
or contact the dealer or manufacturer of your computer.)
Note: For all above power management functions, the computer "Power
Management" must be supported and enabled.
Conceptronic USB keyboard !
6
All manuals and user guides at all-guides.com
3. Installation & usage
Enjoy the use of your