Conceptronic C54BRS4 Guide De Démarrage Rapide page 27

All manuals and user guides at all-guides.com
ENGLISH
Parameter
User Name
Password
Service Name
MTU
Connection Type
Idle Time
Description
Enter the User Name provided by your ISP for the PPPoE
connection
Enter the Password provided by your ISP for the PPPoE
connection
This is optional. Enter the Service name should your ISP
requires it, otherwise leave it blank.
This is optional. You can specify the maximum size of your
transmission packet to the Internet. Leave it as it is if you to
not wish to set a maximum packet size.
If you select "Continuous", the router will always connect to
the ISP. If the WAN line breaks down and links again, the
router will auto-reconnect to the ISP.
If you select "Connect On Demand", the router will auto-
connect to the ISP when someone want to use the Internet
and keep connected until the WAN idle timeout. The router
will close the WAN connection if the time period that no one
is using the Internet exceeds the "Idle Time".
If you select "Manual", the router will connect to ISP only
when you click "Connect" manually from the Web user
interface. The WAN connection will not disconnected due to
the idle timeout. If the WAN line breaks down and latter links
again, the router will not auto-connect to the ISP.
You can specify an idle time threshold (minutes) for the WAN
port. This means if no packets have been sent (no one using