Télécharger Imprimer la page

EHEIM LEDcontrol+e 4200140 Mode D'emploi page 11

Masquer les pouces Voir aussi pour LEDcontrol+e 4200140:

Publicité

English
The EHEIM LEDcontrol+e is designed especially for the operation of the following lamps:
EHEIM powerLED+ from serial number 17xx05
The colour channels can be controlled separately from each other and thereby not
only the light colour but also the brightness scale can be programmed.
3. Safety Instructions
There are risks for people and property associated with this device if it is not used correctly and properly
or in accordance with its intended purpose or if the safety instructions are not observed.
For your safety
• Do not allow the device packaging and small parts to get into the hands of children or persons
who are not fully in control of their actions as this can be dangerous (risk of suffocation!). Keep
away from animals.
• This equipment is not intended for use by persons (including children) with limited physical,
sensory or mental abilities or for persons with no experience or knowledge unless they are
supervised by a person respond for safety or unless they have received from such a person in-
structions on how to use the equipment. Children should be supervised to ensure that they do
not play with the equipment.
• Only for EU countries:
This equipment can be used by children above the age of 3 or by persons with reduced physi-
cal, mental or sensory capacities or a lack of experience or knowledge, provided they are su-
pervised or have received instruction in the safe use of the equipment and therefore under-
stand the risks involved. Do not allow children to play with this equipment. Do not allow chil-
dren to clean or conduct user maintenance without supervision.
• The device must be operated in combination with EHEIM powerLED+ lamps and EHEIM po-
wersupply power supplies. Observe the user instructions of the lamps, in particular, the chap-
ters Safety, Putting into Operation, Operation and Maintenance!
• Before use, carry out a visual inspection in order to ensure that the device, especially the power
supply unit and plug, are not damaged.
• Do not use the device if it does not function properly or if it is damaged.
• Never use the device with a damaged power cord or power supply unit.
• Repairs must be carried out exclusively by an EHEIM service centre.
• Do not carry the device by the connecting cable.
• Only carry out the activities that are described in these instructions.
• Protect the power cable from heat, oil and sharp edges.
• Never make technical alterations to the device.
• Use only original spare parts and accessories for the device.

Publicité

loading