Télécharger
Partager
Imprimer la page
DHP 5512198 Instructions D'assemblage
  1. Manuels
  2. Marques
  3. DHP Manuels
  4. Ameublement d'intérieur
  5. 5512198
  6. Instructions d'assemblage
DHP 5512198 Instructions D'assemblage

DHP 5512198 Instructions D'assemblage

Masquer les pouces

Publicité

Liens rapides

Télécharger ce manuel
Weight Limits:200 Lb / 92 Kg
WARNING
WARNING FOR YOUNG CHILDREN: This product contains small components. Please ensure that they are kept away from small children. Children under the age of 6,
●
small infants and babies must not sleep on this bunk bed for safety reasons.
This product is designed for home use and not intended for commercial use.
●
Recommended # of people needed for assembly: 2 (however it is always better to have an extra hand). Estimated assembly time is 2 hour.
●
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
●
X.P. - 11/26/2013
Junior Loft with Storage Steps
29986 55122
1
0
STOP
www.dhpfurniture.com
5512198
Black / Blue
DO NOT RETURN PRODUCT TO THE
STORE
If a part is missing or damaged, call our
toll-free customer service line. We will
gladly ship your replacement parts FREE
of charge:
1-800-267-1739
or access our website:
Date of Purchase
___ / ___ / ___
Lot Number
_________
B34551219801 - 10125 - M

Publicité

loading

Manuels Connexes pour DHP 5512198

Sommaire des Matières pour DHP 5512198

  • Page 1 5512198 Junior Loft with Storage Steps 29986 55122 Black / Blue Weight Limits:200 Lb / 92 Kg DO NOT RETURN PRODUCT TO THE STORE STOP If a part is missing or damaged, call our toll-free customer service line. We will...
  • Page 2 Warranty Information DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and no assembly labor is included.
  • Page 3 3 /35 B34551219801...
  • Page 4 PARTS T608920 T911420 T608900 T921250 T921260 T921270 T921280 T921210 T921200 T917180 T609100 T914900 T608910 x 22 T914910 T914940 T911450 4 /35 B34551219801...
  • Page 5 PARTS T914970 T915020 T915010 T921220 T914980 T921290 T915000 T914990 T915180 T915190 T391660 T201060 T391650 X 44 X 21 5 /35 B34551219801...
  • Page 6 PARTS T915030 T915080 T915040 T915120 T915130 T915050 T915090 T915140 T915060 T915100 T915110 T915070 T915150 T915170 T915160 T300410 6 /35 B34551219801...
  • Page 7 PARTS BLISTER PACK T5512198-00-1/2 ST4.2 X 10mm 1/4" X 5/8" 1/4" X 3/4" 5/16" X 3/4" X 38 1/4" X 7/8" 1/4" X 1 1/4" X 10 1/4" X 2 3/16" 1/4" X 2 3/4" T5512198-00-2/2 ST4.2 X 12mm X 12 X 28 1/4"...
  • Page 8 Attach (I) & (T) to (C) & (D) with finger tighten BOLTS (5); Set (M) to (C & D). 8 /35 B34551219801...
  • Page 9 Attach (U) to (A) & (S), then set (L) to (A) & (S); Fix them in place with BOLTS (5) X 5. Attach (H) to (A),(B) & (S) using (P) X 3 with BOLTS (1); Attach (F) to (A) & (B) with BOLTS (5). 9 /35 B34551219801...
  • Page 10 Attach (G) to (A, B, C & D) with BOLTS (6). Attach (E) & (J) to (A, B, C & D) with BOLTS (5); Then fix (E) to (G) with BOLTS (2). X 11 10 /35 B34551219801...
  • Page 11 Attach the (O) to (G); Lock (O) in place with (Y) X 44. Attach the (Q) in the middle as shown. 11 /35 B34551219801...
  • Page 12 Attach (W) to (B) & (D1) with BOLTS (5) X 2; Attach (V) to (B & D1) with BOLTS (2). Set (X) into (B & D1); Then fix with BOLTS (5) X 3. 12 /35 B34551219801...
  • Page 13 Set (Z) to (K) with SCREW (8); Attach (Z) & (P) to (X) with BOLT (1); Attach (D2) to (D1 & K) with BOLTS (5) then attach (E2) to (D1 & K) with BOLTS (5). 13 /35 B34551219801...
  • Page 14 For the following steps you may need a SCREWDRIVER! Screw (11) onto (A1) & (F1); Attach (A1) & (F1) to (I1) then fasten by turning CAM (13) clockwise as far as possible. 14 /35 B34551219801...
  • Page 15 Screw (11) onto (B2); Attach the subassembly from previous step to (B2) then fasten by turning CAM (13) clockwise as far as possible. 15 /35 B34551219801...
  • Page 16 Attach (N) to (I2) with SREWS (7) then attach (N) to (F1) with SCREWS (7). NOTE: Please ensure a clearance between (I2) and (B2) to avoid scratching between the two parts. X 12 16 /35 B34551219801...
  • Page 17 Attach (C1) to (B2) with BOLTS (4); Then place the subassembly to the bed frame as shown. 10.2 10.1 17 /35 B34551219801...
  • Page 18 Disassemble the BOLT (1) for the (S) as shown in the zoom view. Attach (R) to (H & F) with BOLT (1); Fasten (B2) to (F & D2) with BOLTS (3); Attach (B1) to (Z) with BOLT (14) then to (D2) with BOLT (1). 11.1 11.2 18 /35...
  • Page 19 Attach (C1) to (A2) with BOLTS (4); Attach (K1) to (C1) with BOLTS (3). Place the subassembly into place as shown then fasten it to (B & D1) with BOLTS (2) and to (B1 & R) with BOLTS (3). 12.1 12.2 12.4 12.3...
  • Page 20 Screw (11) into (F2) & (C2); Insert (12) on both side of (F3). Attach (F3) & (K2) to (F2) & (C2); Fasten by turning CAM (13) clockwise as far as possible. 13.2 13.1 13.3 20 /35 B34551219801...
  • Page 21 Screw (11) into (J1); Attach the subassembly from previous step to (J1); Fasten by turing CAM (13) clockwise as far as possible. 14.1 14.2 14.3 21 /35 B34551219801...
  • Page 22 Screw (11) into (E1) then stick PAD (9) on (E1) as shown below. Attach (E1) to the subassembly from previous step; Fasten by turning CAMS (13) clockwise as far as possible. 15.1 15.4 15.3 15.2 22 /35 B34551219801...
  • Page 23 Attach (X1) to (J1) with BOLTS (4); Turn the drawer over then place it to place as shown below. Once assembly is complete, please make sure all hardware is tightened. 16.1 16.2 23 /35 B34551219801...
  • Page 24 T919620 T920510 T921230 NOTE: (Y1), (V1) & (Z1) have been pre-assembled on (A/B/C/D/D1/K), (E2) & (X1). They are available for replacement. 24 /35 B34551219801...
  • Page 25 PERIODICALLY CHECK AND ENSURE THAT THE GUARDRAIL, LADDER AND OTHER COMPONENTS ARE IN THEIR PROPER POSITION, FREE FROM DAMAGE, AND THAT ALL CONNECTORS ARE TIGHT. REPLACEMENT PARTS, INCLUDING ADDITIONAL GUARDRAILS, MAY BE OBTAINED FROM ANY OF OUR (DHP) DEALERS. DO NOT ALLOW HORSEPLAY ON OR UNDER THE BED AND PROHIBIT JUMPING ON THE BED.
  • Page 26 Al registrar tu producto con nosotros entrarás automáticamente a nuestro concurso trimestral con la oportunidad de ganar premios increíbles. Beneficios: Con tan sólo tomarte unos minutos en registrar tu producto y mejorar tu experiencia con DHP puedes obtener: ● Información exclusiva sobre nuevos productos ●...
  • Page 27 PÁGINA 07 Una la parte (I) & (T) en (D) & (C) apretando con los dedos los TORNILLOS (5); Coloque parte (M) en (C) y (D). PÁGINA 08 Una la parte (U) en (A) & (S), y luego (L) en (A) & (S); Coloque en su lugar utilizando TORNILLOS (5)x 5. Una la parte (H) en (A, B & S) utilizando (P) x 3 con TORNILLOS (1);...
  • Page 28 PÁGINA 19 Atornille (11) en (F2) & (C2); Introduzca las piezas (12) en ambos lados de (F3). Una (F3) & (K2) a la parte (F2) & (C2); Apriete girando los CAM(13) hacia la derecha lo más posible. PÁGINA 20 Atornille (11) en (J1); coloque el subensamble del paso anterior en (J1); Apriete girando los CAM (13) hacia la derecha lo más posible. PÁGINA 21 Atornille (11) en (E1) y despues pegue la ESPONJA (9) en (E1) como se muestra abajo.
  • Page 29 COMPRUEBE Y ASEGÚRESE PERIÓDICAMENTE DE QUE LA BARANDILLA, LA ESCALERA Y OTROS COMPONENTES ESTÉN EN SU POSICIÓN APROPIADA, LIBRE DE DAÑO, Y DE QUE TODOS LOS CONECTADORES ESTÉN APRETADOS. r PIEZAS DE REEMPLAZO, INCLUYENDO BARANDALES DE PROTECCIÓN ADICIONALES, PUEDEN SERADQUIRIDAS EN CUALQUIERA DE NUESTROS DISTRIBUIDORES DHP. r NO PERMITA JUGAR EN O DEBAJO DE LA CAMA Y PROHÍBA SALTAR EN LA CAMA.
  • Page 30 Información de Garantía DHP garantiza que este producto está libre de defectos materiales y de mano de obra aceptando corregir cualquier defecto. Esta garantía es válida por un año a partir de la fecha de compra original de este artículo.
  • Page 31 à l'information à jour sur les tendances, les nouveaux produits, les concours et les promotions des informations DHP. Merci d'avoir acheté un produit de DHP. Nous espérons que cela donnera de nombreuses années de service.
  • Page 32 PAGE 07 Fixer (I) & (T) à (C) & (D) en serrant les boulons (5) à la main. Insérer (M) sur (C & D). PAGE 08 Fixer (U) à (A) & (S), puis insérer (L) sur (A) & (S) en utilisant les boulons (5) X 5. PAGE 09 Fixer (G) à...
  • Page 33 PAGE 20 Visser (11) dans (J1); Attacher le sous-ensemble de l'étape précedent à (J1); Fixer-les en vissant cam (13) dans le sens horaire le plus loin possible. PAGE 21 Visser (11) dans (E1) puis coller pad (9) sur (E1) tel qu'illustré. Attacher (E1) au sous-ensemble de l'étape précedent; Fixer-les en vissant cam (13) dans le sens horaire le plus loin possible.
  • Page 34 ENDOMMAGÉES ET QUE TOUS LES BOULONS ET ÉCROUS SOIENT BIEN SERRÉS. LES PIEÈCES DE RECHANGE, Y COMPRIS GARDE-CORP SUPPLEMENTAIRE, PEUT ETRE OBTENIR A PARTIR DE L'UN DE NOS (DHP) CONCESSIONNAIRES. NE JOUEZ PAS SUR OU SOUS LE LIT ET NE SAUTEZ PAS SUR LE LIT.
  • Page 35 Informations sur la garantie DHP garantit que ce produit est exempt de tout vice de matériau et de fabrication et s'engage à remédier à un tel défaut. Cette garantie couvre un an à compter de la date d'achat originale. Cela se limite uniquement à la réparation ou au remplacement des pièces défectueuses. Aucun travail de montage n'est inclus.