GrillMaster 720-0894A Mode D'emploi page 16

d) Place upside down the bottom panel and attach to the Cart Leg,
Back right (G) and cart leg, Front right (F) by using four 1/4"x12mm
black screw (AA) which are in the hardware pack. As show in Fig. 9.
e) Repeat step d to attach left legs to the bottom
panel making sure all screws are tight.
3. Triangle Bracket Assembly
a) Loosen, but do not remove four screws pre-assembled on
Cart Leg, Back Left (D) and Cart Leg, Back Right (G).
Align the holes of the triangle brackets with the screws in
the Cart Leg, Back Left (D) and Cart Leg, Back Right
(G) .Then tighten the screws.
b) Attach the triangle brackets to bottom panel (B) by using
four 5/32"x10mm black screws (BB). As show in Fig.10.
Note: The flat portion of the triangle should face
the rear of the grill.
16
All manuals and user guides at all-guides.com
D
Fig. 9.
G
Fig. 10.
F
G