GrillMaster 720-0894A Mode D'emploi page 14

c) Attach the front and rear cart beam triangle bracket
by using four 1/4"x12mm black screws (AA)
the hardware pack. As shown in Fig. 3.
d) Loosen, but do not remove the screws that are pre-
assembled on the Cart Leg, Front Right (F )and Cart
Leg, Back Right (G). Attach Cart Leg, Front Right (F)
and Cart Leg, Back Right (G) to Cart Frame (Y), by
aligning the holes on the Cart Frame. Tighten the
screws that were loosened above. As shown in Fig.
4.
e) Attach the front and rear cart beam triangle bracket by
using four 1/4"x12mm black screws (AA)
hardware pack. As shown in Fig. 5.
14
All manuals and user guides at all-guides.com
which in
which in the
Fig. 3.
Fig. 4.
Y
G
Fig. 5.
F