Inglesina DARWIN INFANT RECLINE Manuel D'instructions page 33

• Consult a Doctor before using this product with premature babies or those with
medical conditions.
• WARNING! Always install the Inglesina Darwin Infant Recline child car seat ONLY
FACING IN THE DIRECTION OPPOSITE TO THE NORMAL DIRECTION OF TRAVEL OF
THE VEHICLE.
• If your vehicle does not have an i-Size seat, installation is also allowed with the
Darwin 360° i-Size base or with Darwin i-Size base on ISOFIX vehicle seats that are
listed in the Vehicle Type List enclosed to the manual of the relevant base or available
at inglesina.com website.
• The base make it easier to fit the child car seat in and remove it from your vehicle
safely.
• Always check before buying the product whether it can be properly installed in your
vehicle. If in doubt, consult either the child car seat manufacturer or the retailer.
• Observe the instructions in the vehicle owner's manual.
• Do not use the Darwin Infant Recline child car seat after 7 years from the date of
production indicated on the product; the natural ageing of the materials may cause
slight changes of the product's properties.
• Do not use the Inglesina Darwin Infant Recline child car seat and/or the Darwin 360°
i-Size Base and/or Darwin i-Size Base if:
- they were subject to an accident, even to a slight one. They may have been
subject to invisible damages. The product has to be replaced with a new one to
assure the original safety level.
- they are damaged, not equipped with the instruction manual, or any component
is missing. Contact the Inglesina authorized Retailer or Customer Care Service
immediately.
• Inglesina advises that child car seats should not be bought second-hand. They may
have invisible damages that affect the safety performances.
• Verify the correct hooking of all components of the Inglesina Darwin Infant Recline
child car seat before each travel and/or when the vehicle is subject to periodical
checks, maintenance, and cleaning. Other people may have moved and/or unhooked
the Inglesina Darwin Infant i-Size child car seat and may not have repositioned the
same properly pursuant to the instructions.
• WARNING! Always secure the child with the safety straps provided when the child
is in the product even when handling or carrying the product by hand.
• Adjust the backrest position in accordance with the height of the child so that the
back straps are behind the shoulders.
• Check that any straps restraining the child is adjusted to the child's body.
• Avoid putting thick clothes on your child under the belt.
• Never leave the child in the child car seat if straps are loose or unfastened.
• The child's clothing should not interfere with the proper hooking of the buckle.
• For the child car seat to offer optimum protection, shoulder belts should fit the body
as closely as possible.
• After adjusting the backrest height and/or seat angle, check that the seat belt
tension is still adequate. If not, adjust it correctly.
• Check that straps with buckles are not twisted and are not trapped in the car door
or the mobile parts of the child seat.
• It is vital for the safety of your child that the harness buckle works correctly.
Malfunctions of the harness buckle may be caused by accumulations of food, dirt or
SAFETY BELTS
33