Braun DigiFrame 7 Motion Mode D'emploi page 17

All manuals and user guides at all-guides.com
2.1. Installing & Replacing the Battery
Hold the remote control upside down, press the ridged area of the battery cover and pull
towards you to remove the tray. Place one cr2025 lithium button-cell battery in the tray
with the positive "+" side facing you. Reinsert the tray.
3. Getting Started
1. Place the digital photo frame with installed stand on a flat surface. Connect the power
adapter to a standard electrical outlet and DC in on the left side of the unit.
2. Remove the plastic battery insulator from the battery compartment and make sure the
remote control has a battery inserted. Refer to "installing & replacing the battery" if a new
battery is needed.
3. The unit will start up automatically when powered on. Press power at the rear of the unit
or on the remote control to switch the unit on or off.
4. Operating Instructions
Press ENTER to access the menus, Photo, Music, Video, Clock, Calendar or Setting.
Photo Picture list
Music Music list
Video Video list
Clock Clock mode
Calendar Calendar mode
Setting Setting menu of digital photo frame
16