Kingfisher DDD500WT151DA Mode D'emploi page 11

All manuals and user guides at all-guides.com
In Programme mode, Boost can be stopped at any time by pressing and
holding for 3 seconds on the OK-boost. Following a manual stop in Pro-
gramme mode, Boost can only be reactivated by a programme after a peri-
od of 2 hours.
PRECAUTIONS FOR USE
SETTING THE TEMPERATURE
- The heating power is maximal as long as the setpoint temperature has
not been reached. Programming the setpoint temperature to the maximum
temperature possible, will not heat the room quicker.
- Wait several hours for the room temperature to stabilise before adjusting
the temperature setting.
POWER CUTS
- Following a power cut and resume, the appliance will automatically restart
with all of the settings and programs used before the cut (if it was in opera-
tion before the cut, it will stay on after the power resume).
- The programmer clock starts from the time the cut began. This means that
the time and day could be misaligned.
- Following a power resume, the reference, then the total time the appliance
is turned on is displayed for 30 seconds on power resume.
11
Quick start