charger for 1 minute. After 1 minute, plug in the charger and reinsert
the battery. If the status LED blinks GREEN, then the battery is properly
charging. If the status LED is still blinking RED, the battery is defective
and needs to be replaced.
WARNING!
If the battery is inserted into the charger when warm or
hot, the CHARGING LED indicator light on the charger
may switch on and illuminate RED. If this occurs
allow the battery to cool outside of the charger for
approximately 30 minutes.
Checking The Charger
If the battery pack does not charge properly:
•
Check the current at the power outlet with another tool. Make
sure that the outlet is not turned off.
•
Check that the charger contacts have not been shorted by debris
or foreign material.
•
If the surrounding air temperature is not normal room
temperature, move the charger and battery pack to a location
where the temperature is between 7 ˚C and 40˚C.
Detachable Power Cord
The power cords of the charger are detachable. They can be removed
from the charger and used interchangeably. (See the figure below)
All manuals and user guides at all-guides.com
①
③
Maintenance
②
④
WARNING!
Do not at any time let brake fluids, gasoline, petroleum based
products, penetrating oils, etc. come in contact with plastic
parts. They contain chemicals that can damage, weaken or
destroy plastic.
EN
5
cramer.eu