EnglisH
1
you have trouble removing the batteries, you can also take the
appliance to a Philips service centre. The staff of this centre will
remove the batteries for you and will dispose of them in an
environmentally safe way.
1
Remove the adapter from the wall socket and let the appliance run
until the batteries are empty.
Remove the epilating head (Fig. 11).
Hold the appliance in your hand and insert a screwdriver into the
opening in the bottom of the epilator (1). Then move the
screwdriver upwards () to open the housing (Fig. 17).
Pull the two housings halves apart with your thumbs until the snap
connections break (Fig. 1).
5
Remove all components (motor unit and the printed circuit board
unit) from the housing halves.
6
Insert a screwdriver between the plastic battery holder and the
batteries (Fig. 19).
7
Remove the batteries from the plastic battery holder and the
printed circuit board (Fig. 0).
Do not try to reassemble the appliance in order to run it from the
mains. This is dangerous (Fig. ).
guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you find its phone number in the worldwide
guarantee leaflet). If there is no Customer Care Centre in your country,
go to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
All manuals and user guides at all-guides.com