Télécharger Imprimer la page

Fellowes POWERSHRED 84Ci Mode D'emploi page 4

Masquer les pouces Voir aussi pour POWERSHRED 84Ci:

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT MAINTENANCE
OILING SHREDDER
machine may experience diminished sheet capacity, intrusive noise when
recommend you oil your shredder each time you empty your waste bin.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1
2
Press and hold forward
*Apply oil across entry
( ) 2-3 seconds
* Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
TROUBLESHOOTING
TROUBLESHOOTING
indicator will remain illuminated and the shredder will
the continuous operation and recovery time for this shredder.
SafeSense
®
Indicator: If hands are too close to the paper entry, the SafeSense
is active for 3 seconds, the shredder will automatically turn off and the user must press the power button on the control panel to resume shredding.
JAM PROOF SYSTEM*
Eliminates paper jams and powers through tough jobs.
DISABLING THE FEATURE
1
Should you choose to disable
the system, press and hold
Auto light is no longer
the auto button (blue) and
forward ( ) key at the
repeat step 1)
same time
*100% Jam Proof when used in accordance with user manual
4
All manuals and user guides at all-guides.com
3
2
Shredding can continue with
the system disabled, however a
paper jam may occur with too
many sheets and Remove
Paper icon (
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors
may become blocked by paper dust causing the motor to run even if there is no paper present.
TO CLEAN THE SENSORS
1
2
Locate Auto-start
shredder
infared sensor
®
indicator will illuminate and the shredder will stop shredding. If SafeSense
4
If jam occurs, press and
hold forward ( ) key until
the document is completely
through the shredder
) will illuminate
.
4
3
Dip cotton swab in
rubbing alcohol
away any contamination
from the paper sensors
®
5
6
If not cleared, press
If steps 4 and 5 do not clear
reverse (
) briefly
jam, reverse paper all the
(repeat steps 4 and 5
way out, remove several
until shredded)
sheets and refeed
ENGLISH
Model 84Ci

Publicité

loading