MOB MO8426 Mode D'emploi page 4

anuals and user guides at all-guide
•
Press and hold the TEST/HUSH button. The LED flashes
quickly and the detector sounds. This means the detector
works properly. At that time, the detector turns to a low
sensitive detection mode. After 10 minutes, it turns to the
standard sensitive detection mode.
Notice:
1. The only replaceable part is the battery. No user serviceable
parts inside.
2. Any repairs should be carried out by qualified personnel.
3. Test the alarm weekly and every time the battery is replaced.
4. Do not use in damp, dusty and smoky environments.
5. Test the alarm for normal operation using the test facility when
the battery is replaced.
6. Replace the smoke detector after 8 years of use.
DE
Rauchmelder
Produkt Spezifikationen
Batterie:
Alarm Ausgang:
Betriebs-Temperatur:
Betriebsfeuchtigkeit:
Ruhestrom:
Alarmstrom:
Maße:
Gewicht:
LED-Indikator:
Ruhezustand:
Standby Status:
Niedriger Batteriestatus:
und benötigt einen Batteriewechsel
Installation
•
Wählen Sie eine angemesse Position an der Decke mit einem
angemessenen Abstand zu Türen, Fenster, Ventilatoren und
1 x 9V 6F22
≥85dB/3m
-10°C - 40°C
≤95% relative
Luftfeuchtigkeit ohne
Wasserkondensation
≤12µA
≤20mA
36mm x 102mmØ
140g
Red LED
LED blinkt alle 10s
LED blinkt alle 43s
Piept alle 43 Sekunden