Jabra SPEAK 450 Cisco Guide Rapide page 6

2
CONNECT TO MOBILE DEVICE
1. Set the On/Off/Bluetooth switch to
the Bluetooth setting, on the base
of the speakerphone).
2. Press and hold (2 secs) the
Connect button on the base of the
speakerphone until the blue light
flashes.
3. Enable Bluetooth on your mobile
device, and select the Jabra Speak
450 Cisco from the list of available
Bluetooth devices. If prompted for a
password enter 0000.
Note:
You can connect and use both a PC and mobile device simultaneously.
Refer to the User Manual for more information
All manuals and user guides at all-guides.com
ENGLISH
3