Publicité
Les langues disponibles
Les langues disponibles
Cleaning
Always clean the frame, fast/gentle/beginner caps and discs
after use to keep them in a hygienic state.
Switch off and unplug the appliance before cleaning.
Dry cleaning
Epilation head
1. Lift the frame, fast/gentle/beginner caps
upward while holding the cap release rib
[BCD3].
2. Clean the epilation head [E]
with the cleaning brush [J].
Wet cleaning
Epilation head
1. Lift the frame, fast/gentle/beginner caps upward while
holding the cap release rib [BCD3].
2. Apply liquid hand soap to the discs.
3. Turn the switch on and then wet the discs to
create foam.
10
All manuals and user guides at all-guides.com
1
2
2
3
4. Wash the head with water to wash out
hair.
•
Do not use hot water.
•
If soap is not completely washed away,
then a white deposit can accumulate
and prevent the discs from moving
smoothly.
5. Turn the switch off, wipe the appliance
with a dry cloth and dry it well.
Foot care head
1. Apply liquid hand soap to the central part of the file.
2. Pour a small amount of water on the file and turn the
switch on.
3. Rinse any debris thoroughly with water or
lukewarm water.
4. After turning the switch off, remove
the frame and rinse inside.
4
3
4
Publicité
