Felisatti SD10,8IL Mode D'emploi Original page 7

2) The operator to wear hearing protection
3) Vibration emission
Vibration total values(triaxial vector sum)
determined according to EN 60745
Power Tool
Vibration emission value(a
Uncertainty (K) [m/s
4) The following information
The declared vibration total value has been
measured in accordance with a standard test
method given in EN60745 and may be used
for comparing one tool with another.
The declared vibration total value may also
be used in a preliminary assessment of
exposure.
5) A warning
The vibration emission during actual use of
total value depending on the ways in which
the tool is used.
the operator that are based on an estimation
of exposure in the actual conditions of use
(taking account of all parts of the operating
cycle such as the times when the tool is
addition to the trigger time).
Rated voltage [V DC]
rate[/min]
Tool
. Torque[N.m]
Weight according to EPTA
-Procedure 01/2003 [kg]
Tool holder
Voltage [V DC]
ry
Capacity [mAh]
Weight [kg]
) [m/s²] 10
h
2 ] 1.5
fety measures to protect
0-2400
0-3000
100
0.9
1/4"(6.35mm)hexagon socket
1300
0.2
voltage [V AC]
requency [Hz]
Output voltage [V DC]
ry
Charger
Charging current [A]
Charging time [min]
Weight [kg]
ey Class
2) List of Contents
Plastic case
ry
ry Charger
7. Description of
Functions and Applications
1) Description of Function
1
Lock sleeve
Tool holder
Work light
Rotation direction switch
On/Off switch
Housing
2
3
2) Applications
ver : for tightening and loosening screws
8. Operating Instructions
1) How to charge the battery
rt the plug of the charger in the sock
and the charging indicating lamp will be
within one second.
charger will be in the stand by position.
220-240
50/60
2.6
30
0.4
1 EA
2 EA
1 EA
1 EA
r
r
ry
7