Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User Manual
Installation
1. Remove the battery cover and insert the supplied batteries, checking that they are inserted with the
correct polarity.
2. Take out the USB Receiver as shown below.
3. Insert the USB receiver into a vacant USB port on your computer, it will be detected and automatically
installed by your computer.
The Presenter and Receiver should now automatically pair, and be ready to use. If for any reason they do
not, or if you need to re-pair them at a later date please follow these instructions.
1.
Press the Link button on the USB Receiver until the Link Indicator lights up.
2.
Press and hold the Fn and Link buttons on the Presenter simultaneously for 3 seconds until the Link
Indicator on the USB Receiver blinks.
- 2 -
English
Publicité
Table des Matières
