Function Setup
By using the buttons MENU, + and – the following functions can be set up:
Function
Application
Operation
Number of times to press the
MENU button for entering
the selection menu.
Selection key
LCD-Display
&RQ¿UPDWLRQ NH\
Remarks
All manuals and user guides at all-guides.com
Channel Selection
Select the channel
for communication.
1x
+ / -
Press +/- to select
the channel.
Two radios have to be
in the same channel in
order to communicate
with each other.
15
Auto Channel Scan
Scan the channel automatically to
identify the occupied channel.
Press
to start channel
scanning.
Channel scanning stops once the signal is detected
If no signal is detected within 10 seconds or if any keys are
pressed, the channel scanning function will be interrupted.
It will then maintain the previous channel.
2x
Start channel scanning
from the present channel.