BUSCH WALKIE TALKIE 202 Manuel D'utilisation page 16

Functions
Power On / Off
1. Press and hold POWER key
2. A »Bi« sound indicates the unit is ready for use and the LCD display will show all icons.
3. After one second the unit will go to standby mode. (Fig.2)
4. Press and hold POWER key
will also be heard, indicating the radio is going to be switched off.
Lock / Unlock Key
1. Press and hold MENU key for 2 seconds to lock the key. (Fig.3)
2. Only PTT and CALL buttons can be activated during key locked operation.
3. To unlock the key, press and hold MENU button again for 2 seconds.
Channel Setting
Select the same channel as that of your partner, e.g. CH = 01
1. Press MENU key one time to enter. (Fig.4)
2. Press + or – key to change the channel.
3. Press POWER key WR FRQ¿UP WKH VHWWLQJ
To Make a Call
Press CALL key one time to send a ring tone to your partner. »TX« shows. (Fig.5)
To Transmit a Signal
Press and hold PTT key and speak into the microphone. »TX« shows. (Fig.5)
All manuals and user guides at all-guides.com
for 2 seconds to turn on the unit.
for 2 seconds again to turn off the unit. A »Bi« sound
13
Fig.2
Fig.3
Fig.4
Fig.5