Asus GigaX1024X Guide D'utilisation page 6

All manuals and user guides at all-guides.com
Placement options
Placing the switch on a flat surface
Place the GigaX1024X on a flat and stable surface. Make sure the location
meets the operating environment specification. See page 3 for details.
NOTE. The length of the UTP Category 5 cable length should not
exceed 100 meters (328 feet).
Mounting the switch on a rack
You may also mount the GigaX1024X switch on a rack with the supplied
mounting brackets and screws.
To mount the switch on a rack:
1. Locate three screw holes on both sides of the switch.
2. Align the mounting brackets with the switch screw holes.
3. Secure the mounting brackets with three screws supplied in the
mounting kit on both sides of the switch.
4. Place the switch in a 19-inch rack, then secure both sides with four
rack mount screws.
NOTE. The rack mount screws are not supplied.
ASUS GigaX1024X 5