Publicité
Les langues disponibles
Les langues disponibles
Energy Options
Option
Wash Temp Boost
Heats water to approximately
140°F (60°C). Can not be used
with RINSE & HOLD or PLATE
WARMER.
Rinse Temp Boost
Heats water in final rinse to
approximately 140°F (60°C). Can
be used with any cycle except
RINSE & HOLD or PLATE
WARMER.
Heated Dry
Provides faster drying using
heating element during drying
portion of cycle. Drying option may
be changed at any time during
cycle.
Air Dry
Saves energy by keeping heating
element off during drying portion
of cycle. Drying option may be
changed at any time during cycle.
Status Indicator Lights
DELAY START
WATER HEATING
CLEAN
Part No. 12422804
Printed in U.S.A.
©1998 Amana Appliances
Amana, Iowa 52204
All manuals and user guides at all-guides.com
Cycle selection procedure
1. Select WASH TEMP BOOST
pad.
2. Select ENERGY SAVER WASH
pad to turn option off.
1. Select RINSE TEMP BOOST
pad.
2. Select ENERGY SAVER RINSE
pad to turn off option.
1. Select HEATED DRY pad.
2. Select AIR DRY pad to turn
option off.
1. Select AIR DRY pad.
2. Select HEATED DRY to turn
option off.
Description
Glows as timer counts down to begin cycle.
Cycle is being extended to heat water to proper temperature in main wash
or final rinse based on option selected.
Light comes on when cycle is complete. To turn light off, turn dial slightly
until it goes off.
Description
Delays timer advancement until
proper water temperature is
reached. Helps activate detergent
to clean food, grease and soil
from dishes.
Speeds drying and reduces
spotting on dishes.
Water vapor may be seen coming
out of vent during dry cycle. Vent
is open only during drying portion
of cycle.
Opening door slightly after cycle is
complete will help eliminate water
droplets. Water vapor may be
seen coming out of vent during
drying cycle.
P/N 154344901
Publicité
