Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Replacement diode, gasket
and lens kits are available
for Compact Spotlights.
Unplug the fixture. Loosen
the brass lens ring. Remove
lens ring, lens and gasket.
Carefully remove the diode
assembly and replace. Install
new silicone gasket and lens
and reassemble. Ensure that
all components are installed
correctly after servicing and
the lens ring is tightly secured
before submersing the fixture.
RING LIGHT - WWRL5
Installation
The Ring Light is ideal for illuminating bubbling pots, fountains
and uplighting waterfalls. The brass body accommodates 11/ 2 "
standpipes. With the bushing installed, the hole in the center of
the light accommodates 1" standpipes. Simply slide the Ring
Light over the standpipe to illuminate the interior of an
overflowing vase or fountain. Remove the center bushing to
accommodate 11/ 2 " standpipes. The Ring Light's minimal 1/ 2 " profile
makes it ideal for uplighting waterfalls and large trees.
SPOUT LIGHT - WWSL2
Installation
The Spout Light can be installed in the plumbing behind a wall, shining through a Wall Spout
(Figure 1) or under a core-drilled stone or pot (Figure 2). The light is designed to be installed in
any tee that has 1" female threads. If the tee is larger than 1", a reducing bushing with 1" female
threads will be needed. Install the light into the tee, with the light facing the water outlet. Apply
Teflon tape, paste or RTV silicone to the threads of the light and thread the light into the fitting.
Do not use the cord as a handle as you tighten the light or allow it to become twisted when
tightening. The Spout Light cannot transmit light through sweeps or around corners. There
must be a direct path for the light to be transmitted. The use of rigid PVC plumbing (1" diameter
or greater) is highly recommended for the best results.
Figure 1.
1½" Tee
1½" x 1"
Reducing
bushing
Brass
Body
WWCS2:
WWCS4:
Brass Body
Brass Lens Ring
Diode
Gasket
Diode
Gasket
Lens
Figure 2.
1" Female
threaded Tee
¾" Kink-Free
tubing
Lens
Slot
Brass Lens Ring
3
Publicité
