Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
USE
• This appliance is designed to operate in
ambient temperature between 16°C and 38°C.
If these temperatures are exceeded, i.e. colder
or warmer, the appliance will not operate
correctly. If the ambient temperatures are
exceeded for long periods, the temperature in
the freezer section will rise above -18°C and
food spoilage may occur.
• Remove all packaging materials from the
appliance. Wash the inside of the cabinet with
lukewarm water and bicarbonate of soda (5
ml to 0.5 liter of water). Dry the appliance
thoroughly.
SETTING THE THERMOSTAT KNOB
The refrigerator is controlled with a thermostat
knob located inside the fridge, towards the
upper right-hand corner. Turn the knob from
the STOP (OFF) position towards the higher
number for colder temperatures. The know can
be adjusted from setting MIN to MAX.
Changes of the ambient temperature affect
temperature in the interior of the appliance
so choose a correct setting of the temperature
GB-10
control knob, depending on your ambient
conditions.
In the STOP (OFF) position the appliance does
not operate (the cooling system is switched off),
but power supply is not interrupted.
Set the thermostat knob to a middle position to
get 4 to 6°C in the fridge.
Please Note:
If the appliance is switched off you must wait at
least 5 minutes before restarting the appliance
or re-inserting the plug into the wall outlet.
This is to allow the protection device in the
compressor to reset.
If the compressor fails to start correctly remove the
plug and wait for 5 minutes before you try again
then the compressor should restart normally.
The storage temperature may be affected by:
• The room temperature
• How often the door is opened
• How much food is stored
• Position of the appliance
When you set the correct temperature, all these
factors mentioned above shall be taken into
account.
ENGLISH
GB-11
Publicité
