Xiaomi Smart Standing Fan 2 Pro Manuel D'utilisation page 15

Power Adapter
Information Published
Manufacturer
Model Identifier
Input Voltage
Input AC Frequency
Output Voltage
Output Current
Output Power
Average Active Efficiency
Efficiency at Low Load(10%)
No-load Power Consumption
Troubleshooting
Fault
The fan doesn't work.
The fan is unable to connect
to Wi-Fi.
Fan blades are stuck.
The ba ery level indicator
does not light up.
The oscillation function
does not work.
Value and Precision
Zhongshan Baolijin Electronic Co., Ltd.
BLJ24W120200P-V
100 240
–
50/60
12.0
2.0
24.0
89.09
83.11
0.070
Possible Cause
The stand does not properly connect to the fan base.
Child lock is enabled.
The ba ery is depleted.
The Wi-Fi connection is 5 GHz.
The fan has been offline for more than half an hour.
Fan blades are stuck by a foreign object.
The ba ery enters into sleep protection.
The fan is under the auto-oscillation state.
Unit
-
-
V~
Hz
V
A
W
%
%
W
Install the fan base with the stand correctly.
Disable the child lock function.
Charge the fan with the charging base.
Connect to a 2.4 GHz Wi-Fi network.
Reset the Wi-Fi connection.
Unplug the fan and remove the foreign object.
Connect the fan to the charging base to activate the
ba ery.
Wait for the auto-oscillation completes. It will last for
14 seconds at most.
13
Solution