Publicité
IMPORTANT NOTES AND SAFETY NOTICES
• Do not use the product if it is in a poor condition.
• This product is not a toy. The table and lamp must
be assembled and set up by an adult, or under the
supervision of an adult. It must also only ever be used
under adult supervision.
• Do not lean on the table during use.
• Do not use the clip-on LED lamp if it is damaged.
• Do not use the lamp for purposes other than those for
which it is intended.
• The lamp is not a toy, and must not be used
unsupervised by children.
• To avoid risks, switch off the lamp prior to storage.
• The lamp must be kept dry at all times. Do not store in
damp places or near containers of liquids into which
the device could fall.
• Do not use the clip-on LED lamp in a shower or bath.
The clip-on LED lamp is not waterproof. The device
must not be immersed in water.
• Only ever use the lamp once all parts have been
properly assembled.
• Store the lamp in a cool and dry place.
• Under no circumstances should the device be modified
in any way. The device should only ever be repaired or
modified by an authorized specialist.
• The device is not intended for use by persons -
adults or children - with limited physical, sensory or
intellectual capacities or lacking practical experience
or knowledge, unless they are supervised or have
received clear instructions on how to use the device
from a person responsible for their safety. Children must
be supervised to ensure that they do not play with the
device.
• The product is not suitable as an alternative to regular
household lighting.
• The LED light cannot be replaced.
• It is recommended that the clip-on LED lamp is never
used continuously for more than 4 hours, as it could
otherwise overheat.
ASSEMBLY AND USE OF THE STARLYF TABLE EXPRESS
1.
Insert one L-shaped tube into each end of the U-shaped
tube (Fig. 1).
2.
Insert the support bar into the openings on the U-shaped
tube (Fig. 2).
3.
Attach one side of the table surface to the U-shaped tube
using the hooks (Fig. 3).
4.
Attach the other side of the table surface to the support
bar.
INFO: The various hooks on the underside of the table allow
you to set the desired angle of the table surface (Fig. 4).
5.
Use the groove in the table as a stand/holder for
notebooks, your tablet or cellphone, ballpoint pen, etc.
(Fig.5).
Note: The Starlyf® Table Express can bear weights of up
to 25 kg.
CLEANING INSTRUCTIONS FOR YOUR STARLYF TABLE
EXPRESS
Clean the Starlyf
Table Express with a damp cloth, before
®
wiping dry.
TIP for the best table height: For optimal stability, we
recommend choosing position „4" (4th hole from the
bottom).
INSTRUCTIONS FOR USE OF THE CLIP-ON LED LAMP
1. Connect the USB plug to a PC or a corresponding adapter
plug that can be connected to the mains.
2. Press the switch to switch the lamp on and off.
NOTE: Through use of the USB cable, the lamp can be
operated by being connected to a PC or a mains outlet. The
clip-on LED lamp is NOT EQUIPPED WITH BATTERIES and
therefore only works when the USB cable is connected to a
power supply.
3. Attach the clip-on LED lamp wherever suits you: on a table
edge, on the bed headboard ...
4. The clip-on LED lamp is equipped with a flexible, 360°
adjustable neck. Adjust the lamp head to the desired
position: The lamp head is designed so that it can be
adjusted to whichever position is most suitable.
NOTE: It is normal for the device to warm up slightly
during operation. It is recommended that the clip-on LED
lamp is never used continuously for more than 4 hours, as
it could otherwise overheat.
INSTRUCTIONS FOR CARE AND MAINTENANCE OF THE
CLIP-ON LED LAMP
1. Ensure that the device is switched off whenever it is not in
use.
2. Clean the clip-on LED lamp with a cloth or wet wipe (only
once switched off).
The LED light cannot be replaced.
Technical data:
Lamp: 5 V ⎓ 1.5W | Ta=25ºC
Merci de lire d'abord le mode d'emploi en entier pour
utiliser le produit correctement. Merci de conserver
soigneusement ce mode d'emploi.
REMARQUES IMPORTANTES ET CONSIGNES
DE SÉCURITÉ
• N'utilisez pas le produit s'il est en mauvais état.
• Ce produit n'est pas un jouet. La table et la lampe
doivent être assemblées et installées par un adulte ou
sous la surveillance d'un adulte. L'utilisation aussi doit
avoir lieu sous la surveillance d'un adulte.
• Ne pas s'appuyer sur la table pendant l'utilisation.
• N'utilisez pas la lampe à LED Clip-On si elle est
endommagée.
• Ne pas utiliser la lampe à d'autres fins que celles
prévues.
• Cette lampe n'est pas un jouet et doit rester hors de
portée des enfants.
• Pour éviter les risques, éteindre la lampe avant de la
ranger.
• La lampe doit toujours rester sèche. Ne pas la conserver
FR
Publicité
