Philips AUT7006 Manuel D'utilisation page 5

1
10
IV. Installation
Note:
- Before installation, it is important to check the condition of the system to make sure it
has not been damaged during transport.
- Unpack the system and its accessories. Remove the protective packaging material.
Recyclable materials have been used for the packaging and should be disposed of in the
appropriate recycling bins or at the speci�c local recycling center.
Warning: Keep plastic bags out of the reach of children, as they may be dangerous.
- Check if anything is missing according to the packing list and the overview.
- Given that the system will improve the quality of your drinking water, all tools to be used
in the installation process should be clean, rust and grease-free.
- The installation process should be carried out under appropriate hygienic conditions,
taking all necessary precautions concerning materials and components that will come
into contact with water to be treated or consumed.
- Avoid external contamination of the system through improper handling, using gloves,
sanitizing gel, and washing hands as often as is necessary during the installation process,
�rst use, and system maintenance.
- The system and installation shall comply with applicable local regulations.
2
3
5
4 6
9
7
8 Hot
1
Cold
2
Three-way ball valve
3
Drain connector
4
Water inlet pipe
5
Drain outlet pipe
6
Smart faucet cable
7
Filtered water outlet pipe
8
Smart Faucet
9
Power adapter
10
3