Edimax ES-3116RL Guide De Démarrage Rapide page 5

LED Definition
Please refer to the following table for LED definition
LED
Power
Link/Act
Stations Connection
Connect each station to the switch by twisted-pair cable. Plug
one RJ-45 connector into a RJ-45 port of the switch, and plug
the other RJ-45 connector into the station's network adapter.
Power on the switch and then system is ready. For cable
selection, refer to the following table.
Switches Connection
In making a switch interconnection, you could use any port to
connect another switch with straight or crossover cable. As all
the ports support auto MDI / MDI-X function, using a straight
cable to make a switch-to-switch connection is allowed.
Get user manuals: See SafeManuals.com
Status
Steady Green
Off
Steady Green
Blinking Green
Off
Operation
Power is on
Power is off
The port is connected
The port is
transmitting/receiving data.
No connection
4