Hinkley Swell Flush 60 Manuel D'instructions page 8

HANGING THE FAN
Locate motor / housing assembly.
1
Attach the motor assembly to the mounting plate
2
by rotating the two allen head screws in the
mounting plate into key slots in motor support.
(Fig. 1)
Secure the motor assembly to the mounting plate
3
by using the remaining 2 allen head screws,
through the motor support bracket into the mount-
ing plate. (Fig. 1)
NOTE: The housing will need to be tilted / maneu-
Fig. 1
vered to the side to access the Allen Head
screws efficiently.
4
Using the provided allen wrench, fully tighten all
four allen head screws to fully secure motor
A
assembly to the mounting plate. (Fig. 2)
Fig. 2
06 | hinkley.com