D-Link DWL-G810 Guide D'installation Rapide page 2

Connecting the DWL-G810 to your
Ethernet-enabled device
A. First, connect the power adapter to the receptor at the back panel of the DWL-
G810 and then plug the other end of the power adapter to a wall outlet or power
strip. The Power LED will turn ON to indicate proper operation.
B.
Insert one end of an Ethernet cable (included) to the Ethernet port on the back
panel of the DWL-G810 and connect the other end to the Ethernet port located
on the device (e.g., a Set Top Box, Gaming Console, laptop or desktop computer,
or network printer.) The LED light will blink when there is data tranfer through the
wireless connection. (Note: The Ethernet port on the DWL-G810 is Auto-MDI/
MDIX. Meaning you can use a straight-through or crossover-cable to the Ethernet
Port.)
C. The antenna is used by the DWL-G810 to connect to other 802.11b/g wireless
devices.
A. Receptor for
Power Adapter
All manuals and user guides at all-guides.com
2
C. Antenna
Used to wirelessly
connect to 802.11b/
g networks.
B. LAN Port
This is the connection for
Ethernet cables to your
Ethernet-enabled device.