Landmann AG-VI-103BKXX Mode D'emploi page 17

EN
2. Connect the USB cable to the USB socket and to a power source, ideally via a
USB mains adapter to a plug socket. The charging process begins. Both symbols
of the battery status indicator will flash.
3. When the battery status indicator shows a full battery, disconnect the light from
the power source and the USB cable.
4. Plug the cap onto the USB socket.
USE
1. If you have not already done so, place the light in the holder (2).
2. Place the holder around the handle of the barbecue and close it using the
magnet (1) (Picture B). You can also attach the magnet to another part of the
barbecue. But not close to the burners!
3. Press the On/Off button
Timer
1. Activate the display (7) with the button / (11).
2. Set a time by repeatedly pressing the timer buttons (8). To scroll through the
values quickly, hold down the button.
3. Start the timer with the button / .
Once the set time has elapsed, the timer emits a beep.
• If you want to stop the timer prematurely, press the button / again.
• To reset the timer to 0, hold down the buttons + H and + M simultaneously.
L
12
05194_Inlay_145x110_V2_8spr_0422.indb 12 05194_Inlay_145x110_V2_8spr_0422.indb 12
The display switches off automatically after some time.
(5) to switch the LEDs (6) on and off.
29.03.2022 12:38:59 29.03.2022 12:38:59