Télécharger Imprimer la page

Platinum CO2061 Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
ENGLISH
USING YOUR CAN OPENER
Before first use, please follow these instructions:
1. Remove all packaging and any labels,
2. Cleaning all parts, such as the Lever, drive wheel, bottle opener and so
on completely.
TO USE YOUR CAN OPENER
You can use your Can Opener to open cans, open bottles and sharpen
knives.
TO OPEN CANS
1. To attach the Lever to the Can Opener, make the key tabs align with the
key slots, push it frontward to fix it (see Fig. 1), then press down the
Lever to ensure it has been assembled in place (see Fig. 2).
2. Plug cord into electrical outlet.
3. Lift the Lever, tip the can so that the rim is under the locating post, the lid
of the can will be sucked by magnet, then press down the Lever, making
sure the blade is inside the rim (see Fig. 3). Drive wheel will actuate the
can to rotate and the blade will cut the can lid open. Because of the
hands-free feature, it is not necessary to hold the Lever down or support
the can during cutting.
NOTE: The can required to be opened 50mm to 100mm in diameter
and 178mm max in height. In the case when total weight of can is
over 510g, it is necessary to hold the Can Opener Body to avoid
overturning.
4. When the can is opened, the Can Opener will stop automatically. To
remove the can, hold it with one hand and raise the Lever with the other.
CAUTION: Avoid contact with the cut edges of the can or lids as
they are sharp, carefully remove the lid from the magnet and
discard.
NOTE: The time of opening cans continuously do not exceed 1
minute.
5. The excess cord can be stuffed into cord storage at the back of the unit,
and feed the cord through the notch for convenient storage.
4

Publicité

loading

Ce manuel est également adapté pour:

7117082