Brandson Equipment 305872 Mode D'emploi page 12

4.2 Energy display
The energy display provides a wide range of information. The table below gives
an overview of the various values:
Display
V
A
Hz
POWER FACTOR
OVERLOAD + W
W
If the energy consumption exceeds the overload limit, then this is indicated by a
flashing "OVERLOAD".
4.3 Cost display
The cost display provides a wide range of information. The table below gives an
overview of the various values:
Display
kWh
COST + kWh
Day
KgCO₂
COST
Press the "SET" and "COST" buttons simultaneously to reset the registered energy
cost values.
12
displayed value
Electrical voltage
Current
Frequency
Power factor
Overload limit in W
Power
displayed value
Kilowatt hours
Price per kilowatt hour
Time (in days), during which the energy was consumed;
the value is incremented by 1 once the time display counts
24 hours
CO₂ emission (1 kWh corresponds to 0.998 kg of CO₂)
Energy costs (kilowatt hours x price per kilowatt-hour)
English