Publicité
Custom button (ScreenHop switch/DPI
3
adjustment)
5
Right button
7
2.4G/OFF/Bluetooth switch
9
Multi-device indicators
Initial Installation
Mylar
The mouse comes pre-installed with an AA battery. Before using it, open the top cover along the buckle at the bottom of the
mouse, and remove the mylar. Align the front end of the top cover with that of the mouse body, and gently press the rear end
of the top cover to reinstall the top cover.
4
Low battery indicator
6
Sensor
8
Flash-Switch button
10
Buckle
2
Publicité
