Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
Wall clock Tattoo 110
Item no. 1383428
Wall clock Tattoo 100
Item no. 1383429
Intended use
The wall clock is designed to show the time. The clockwork is made up of a dial with
individual components that you assemble yourself and to which suitable hands are
attached.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture,
e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements.
All company names and product names are trademarks of their respective owners.
All rights reserved.
Delivery content
• Clockwork
• Paper template
• 12 x aluminium plates
• 1 x hour hand
• 1 x minute hand
• 1 x second hand
• 1 x screw
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan
the displayed QR code.
2. Select document type and language and enter the item
number into the search field. After submitting the query
you can download displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
All manuals and user guides at all-guides.com
Operation
a) Inserting/changing the battery
• If the wall clock suddenly fails to keep the right time or the hands come to a stop,
• Remove the used battery (if applicable).
• Insert one 1.5 V AA battery (not included) into the battery compartment on the back
b) Setting the time
• Carefully attach the hour hand to the hand shaft first, followed by the minute hand
• Ensure that the hands are parallel to the housing so that they will not touch the clock
• Set the time by turning the setting wheel with the clock symbol on the back of the
• The setting wheel can be turned in both directions.
Mounting the clock on a wall
• The clock is designed to be hung on a wall.
• Use the built-in hook on the back of the device to hang the clock.
• To attach the clock, use the screw supplied, making sure it protrudes a few
• The hands of the clock are not protected by a cover, so handle the clock with care
• Ensure that the hands can move freely and that they will not be blocked when they
• To mount the display elements, first remove all the hands from the clock.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Do not open/dismantle the product (except for inserting/changing the
battery as described in these instructions).
• Correct polarity must be observed while inserting the battery.
• The battery should be removed from the device if it is not used for a long
period of time to avoid damage through leaking. Leaking or damaged
batteries might cause acid burns when in contact with skin, therefore use
suitable protective gloves to handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries
lying around, as there is a risk that children or pets may swallow them.
• Batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge non-rechargeable batteries. There is a risk of explosion!
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
this indicates that the battery needs to be changed.
of the clock, making sure that the positive (+) and negative (-) poles are correctly
aligned. The hands on the clock will start to move.
We recommend that you use high-quality alkaline batteries in the interest
of safety and for a longer battery life.
and finally the second hand. Move all hands to 12:00.
when they move.
housing.
Ensure that no existing cables or pipes (including water pipes) are damaged
when drilling mounting holes or securing screws.
millimetres from the wall. Then hang the clock on the screw using the hook.
when hanging it on the wall. Avoid touching the hands, as this may easily damage
them. (It is advisable to mount the hands after mounting the clock on the wall.)
move. Do not hang any objects on the clock or lean household objects, such as
broomsticks or ladders, against it.
Publicité
