Publicité
Les langues disponibles
Les langues disponibles
STEP 3:
Stand the beam (2) up on end. Two people may be needed for this step to ensure safety. Make sure that the beam is
stable and on a level surface. Locate frame assembly (1) into position between the two tabs on the beam (2). Install
5/8 bolt (4) through aligned holes and fasten with 5/8 flange lock nut (5). Attach lock pins (3) one through the frame and
beam near mast plates and one near pivot. as shown. Carefully lower the beam (2) to the frame.
STEP 4:
Attach the lever control (2) using the link chain (1) and clevis pin (4). Secure with cotter pin (3).
All manuals and user guides at all-guides.com
ITEM
ITEM
Page 9
DESCRIPTION
1
FRAME ASSEMBLY
2
BEAM ASSEMBLY
3
5/16 X 3-1/4" SQUARELOCK PIN
4
BOLT, HFS 5/8 NC X 4.25 GR5
5
NUT, HFN 5/8 NC FLANGE LOCK
DESCRIPTION
1
CHAIN LINK
2
CONTROL LEVER
3
COTTER PIN
4
CLEVIS PIN
QTY
1
1
2
1
2
QTY
1
1
1
1
Publicité
