Publicité
AHS-2012 User Manual
ll manuals and user guides at all-guides.co
your product.
2. DO NOT plug in until ready to use.
3. Ensure hair is dry and tangle free before use.
IMPORTANT: THIS IS A HIGH TEMPERATURE PRODUCT.
1. Place the curling iron on its "safety stand" making
sure that the surface is flat and the resistant to heat. This
appliance will heat up quickly so be careful when handling it.
2. Switch on and allow 2-3 minutes for it to reach the ideal
styling temperature.
3. Use a comb to untangle and separate hair 2'' wide by
1/2'' thick even sections.
4. Use the thumb press to open the clamp and place the
end of one section of hair evenly across the barrel and close
the clamp. For a smoother curl make sure the ends are
under the clamp.
5. Keep the section of hair tight, wind the barrel upward as
far as you would like the curl go. Be careful not to touch the
scalp with the hot barrel.
6. Hold the barrel in place for 10-15 seconds. The amount
of hair rolled each time has a dramatic effect on the type of
curl you will achieve. For ringlet curls use less hair and for
loose wavy curls add more hair.
7. Apply pressure to the thumb press to release the curl
and unwind the hair from the barrel.
8. To help fix the curls in place allow them to cool before
final styling. Learning new styling techniques may take some
time, experiment with your particular hair type and length to
achieve desired results.
Important: Unplug the curling iron after use, and let it cool
down on a heat resistant surface allow to cool in a safe
position. Do not leave product unattended while plugged
in. This curling iron achieves very high salon temperatures.
FEATURES
Technical Data: 100-240V~, 50/60Hz, 25W
1. Professional curling iron
2. Φ19mm curling tong
3. Curling tong with chrome plated
4. PTC heater
5. Fast heat-up
6. ON/OFF switch
7. Max temperature: 200° C
8. Power indicator light
9. 360° swivel power cord with hanging loop
TO CLEAN
Unplug the appliance and allow it to cool down. Use a soft
slightly damp cloth to wipe appliance surfaces. Do not allow
water or any other liquid to get into the unit.
TO STORE
Never store it while it is hot or still plugged in. Never wrap
the cord tightly around the appliance. Never hang unit by
the cord .Store the cord loosely coiled do not put any stress
on the cord where it enters the unit, as it could cause the
cord to fray and break.
5
Publicité
