Publicité
Les langues disponibles
Les langues disponibles
The following configuration for the shelves is the recommended for energy saving: 2 shelves and 1 rack
in the lower zone.
Cleaning and maintenance
Unplug the appliance and remove all items including shelves. Wash the inside surfaces with a warm
water and dry them with clean soft cloth. Use a dry cloth to clean.
How to change the light
Screw out the lamp cover. Screw out the old lamp PCB. Pull out the connecting wire from the lamp PCB ,then
eplace with a new light PCB and plug in the connecting wire.
r
well
Trouble shooting guilds
I case the product is not working properly, please check and handle according to the following
methods. If the situation cannot be changed, please contact the local after-sales service center in
time.
Failure: no cooling
Possible reason
No power
PCB broken
Fan broken
Leakage
Cooling module broken
Failure: poor cooling performance
Possible reason
High ambient temperature
Poor instruction
Poor ventilation
Poor gasket
Poor silicone
Failure: noisy
Possible reason
Dust
Fan broken
Poor heat pump
Ground is not flat
Failure: frost or ice inside
Possible reason
No defrost
Low ambient temperature
Spare parts for this model are available at www.livoo.fr. These parts will be available for up to one
year after the last product is sold and while stocks last.
Action
Check the electricity supply, or change a new plug
contact the after-sales service
contact the after-sales service
contact the after-sales service
contact the after-sales service
Action
The room temperature is hotter than normal
The door is opened too often
Install wine cooler according to our ventilation instruction
contact the after-sales service
contact the after-sales service
Action
Clean the dust from the fan
contact the after-sales service
contact the after-sales service
Place a stability mat. Check if the wine cooler is not in
contact with an external object
Action
Stop working for at least one hour, then restart it
Adjust your device around 25 degree
www.livoo.fr
Install the lamp PCB well. Install the lamp cover
Publicité
