GARDTECH GT38005 Manuel page 5

Electric pole-mounted chain saw GT38005(HCSEG01B)
Content
1. General safety regulations
2. Explanation of symbols
3. Description of the machine and scope of delivery
4. Intended use
5. Assembly
6. Operation
7. Working with the chainsaw
8. Technical data
9. Maintenance
10. Cleaning and storage
11. Information for environmental protection / disposal
12. Ordering spare parts
13. Fault remedy
14. Declaration of conformity
Packaging
This machine is packaged to prevent damage during transportation. The packaging is raw material and can thus be
reused or fed back into the raw materials cycle.
When using the machine certain safety precautions must be taken in order to prevent injuries and damage:
• Read through the operating instructions carefully and observe the instructions contained therein. Familiarise your-
self with the machine, its correct use and the safety devices by means of these operating instructions.
• Store these carefully so that the information is always available to you.
• In the event of the machine being handed over to another party, please include these operating instructions with it.
We accept no liability for accidents and damage caused as a result of disregarding these instructions.
1. General safety regulations
This machine is not intended for use by persons (including children) with an impaired physical, sensory or mental
capacity or t experience and/or
for their safety or receive instructions from that person in the use of the machine. Children should be supervised in
order to ensure that they do not play with the machine.
Remain alert, pay attention to what you are doing and proceed sensibly when working with an electric tool. Do not use
the machine if you are tired or under the
General safety information for power tools
Warning! Read all safety-related information and safety instructions! Failure to observe the safety informa-
tion and instructions may result in electric shock, burns and/or severe injury.
Keep the safety information and instructions for future reference.
The term 'power tool' as used in the safety information and instructions includes both mains-operated tools (with power
cord) and battery-operated tools (without power cord).
1) Safety at the workplace
a) Keep your working area clean, tidy and well-lit. Disorder and poorly lit working areas may result in accidents.
b)
gases or dusts. Power tools generate sparks that may ignite dusts or fumes.
c) Keep children and other persons away while you are operating the power tool. Distractions may result in the
operator loosing control over the tool.
All manuals and user guides at all-guides.com
of drugs, alcohol or medication.
knowledge unless they are supervised by a person responsible
5
GB
NL
DE
FR