GARDTECH GT38005 Manuel page 14

Cause
GB
Chainsaw does not operate
NL
DE
Chainsaw operates irregularly
FR
Saw chain dry
Chain/guide rail hot
Chainsaw jumps up, vibrates or
does not saw properly
14. EC Declaration of Conformity
We declare under our sole responsibility that the product Electric pole-mounted chain saw,to which this declaration
relates correspond to the relevant basic safety and health requirements of Directives 2006/42/EC（Machinery Directive）,
2014/30/EU(EMV-Guideline)and2011/65/EU(ROHS-Guideline)incl.modifications.For the relevant implementation
of the safety and health requirements mentioned in the Directives,the following standards and/or technical
specification(S) have been respected:
EN 60335-1:2012+A11; EN 62233:2008; EN ISO11680-1:2011
EN 55014-1:2006+A1+A2;EN 55014-2:2015; EN 61000-3-2:2014; EN 61000-3-3:2013
Conformity assessment method to annexe V/Directive 2000/14/EC
All manuals and user guides at all-guides.com
Fault
No current supply
Defective outlet
Extension cable damaged
Defective fuse
Mains cable damaged
External loose connection
Internal loose connection
Defective on/off switch
No oil in the tank
Ventilation in the oil tank cap clogged
No oil in the tank
Ventilation in the oil tank cap clogged
Dull chain
Chain tension too loose
Dull chain
Chain worn out
Saw teeth pulling in the wrong
direction
Remedy
Check current supply.
Try a different source of current,
change as necessary.
Check cable, replace if necessary.
Replace fuse
Take saw to a specialty workshop
Take saw to a specialty workshop
Take saw to a specialty workshop
Take saw to a specialty workshop
Clean oil tank cap
Clean oil tank cap
Re-sharpen or replace chain
Adjust chain tension
Re-sharpen or replace chain
Replace chain
Re-mount saw chain with
teeth in the correct direction
14