Renkforce BX6600 Mode D'emploi page 4

c) Connecting the mouse
1. Switch on your computer.
2. There is no need for the user to turn the mouse on and off, it all happens automatically. The
transmitter and receiver connect automatically using FSK Auto-Link technology. When the
connection is established, the operating system installs the necessary drivers. A pop-up
message confirms successful installation.
3. Adjust to the desired sensor resolution by pressing the resolution button (4). 800 or 1600
dpi are possible.
4. You can now control your computer by moving the scroll wheel (1) and clicking the mouse
buttons (2, 3, 5, 6). The forward and back buttons (6, 5) navigate forwards and backwards
between websites.
The optical sensor (10) on the rear side of the mouse does not operate correctly
on some surfaces, e.g. on glass or shiny, reflective surfaces. In such cases, use a
suitable mouse pad or another surface.
It is recommended to use a mouse pad on sensitive surfaces to prevent damage.
d) Saving energy
• The mouse conserves energy in three steps:
- If there is no input within 2 seconds the current is reduced to <0.6 mA
- If there is no input within 1 minute the current is reduced to <0.4 mA
- If there is no input within 30 minutes the current is reduced to <60 μA
• Also remove the receiver (7) from the USB port when not in use and insert it in the receiver
dock on the rear side of the mouse as the receiver is very small and can be easily lost.
Care and Cleaning
• The product does not require maintenance except for occasional cleaning. Use a soft,
antistatic and lint-free cloth to clean the device.
• Do not use any abrasive or chemical cleaning materials.
• Check the optical sensor from time to time. If dust has settled on it, remove with a soft
brush.
• Do not immerse the product in water.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number
in the search box. You can then download the EU declaration of conformity in PDF
format.
All manuals and user guides at all-guides.com Disposal
a) Product
b) (Rechargeable) Batteries
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical Data
Power supply ................................ 1 x 1.5 V/DC Battery, Type Mignon AA
Radio frequency .......................... 2.4 GHz
Number of radio channels ............ 16
Sensor resolution .......................... 800 / 1600 dpi
System requirements .................... Windows
Range ........................................... max. 8 m (in free field)
Operating conditions ..................... -10 to +45 °C, 20 - 90 % RH
Storage conditions ........................ -20 to +100 °C, ≤93 % RH (40 °C)
Dimensions (W x H x D) ............... 109 x 75 x 37 mm
Weight .......................................... 65 g (wireless mouse), 1.5 g (receiver)
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
Remove any inserted (rechargeable) batteries and dispose of them separately from
the product.
You as the end user are required by law (Battery Ordinance) to return all used
(rechargeable) batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Linux Ubuntu, Android 4.x
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
XP, Vista™ 7, 8, Mac OSX 10.4 and higher,
®
*2203080_V1_0120_02_mxs_m_en