Desoutter CVIXS Mode D'emploi page 7

English
INSTALLATION
● See page 4.
B
Mounting
The power supply should be installed
in such a way that it should be easily
switched off.
● Secure the power supply by using 2 screws
(not supplied in the kit).
C
Description
● See page 4.
Legend
1 Mains power indicator
2 Mains power inlet
3 Controller connector
4 ON/OFF switch
D
Connection
● See page 5.
Although our cables are designed
to work under drastic conditions, we
recommend that you check the following
points for longer service life:
- Bending radii should not be lower
than 10 times the cable diameter
(c).
- Friction with the outer sheath
should be restricted (b).
- Any direct pull on the cable should
be avoided (a).
10/2017
MAINTENANCE INSTRUCTIONS
Maintenance should be performed by qualified
personnel only.
● Disconnect from power supply and
wait 10 minutes before commencing
service operations.
Failure to wait 10 minutes may result
in electric shock from undischarged
capacitors.
According to Directive 2012/19/ CE
concerning Waste Electrical and
Electronic Equipment (WEEE), this
product must be recycled.
● Contact your Desoutter
representative or consult the website
"www.desouttertools.com" to find out
where you can recycle this product.
7 / 64
6159921170_04