Publicité
Les langues disponibles
Les langues disponibles
Operation:
Connect both the parent unit and the baby unit to the provided power adaptors
or battery. Press the Power button . The power LED will be on in green color. Put
the baby unit in the baby room and keep it from the baby at 2m distance. Parents
can hear the baby voice with the receiver .If the parent unit volume is too small,
adjust the volume. The volume LEDs indicate the sound level of the baby.
Pairing:
Under the normal situation, the units are well paired by the manufacturer. To
do the pairing by users is a really accidental incidence. You have to do that if the
parent unit (receiver) loses the signal from the baby unit (transmitter).
Procedures:
1) Turn on both baby and parent units.
2) Press the pairing button at the side of both baby and parent units simulta-
neously
3) Release the pairing button.
Some points to remember:
Battery Power:
For both units, receiver and transmitter:
1) Use exclusively AAA size 1.5V alkaline batteries ( 6pcs required, but not
included)
2) Unscrew the screw of the battery compartment, take the lid off and insert the
batteries with right polarity.
3) Put the lid back, screw in the screw and check that it is perfectly closed.
4) Switch the unit on and check that the power LED is on and in green.
Electricity power:
The Baby monitor can operate by batteries as well as by power adaptors.
1) Insert the power adaptor into AC outlet.
2) If your outlet has a security switch, make sure it is on.
3) Switch the unit on and check that the power LED is on and in green.
Low battery indicator and Out of range alert:
When battery becomes weak, the power LEDs of the units turn into red color .
It is time to replace a new battery. For long hours use, it is advisable to use power
adaptor.
All manuals and user guides at all-guides.com
15
Publicité
